|Aggregates||You have 0 items in your Shopping Cart|
Item No: MediumGrit
Move your mouse over the image to magnify
For Epoxy or Urethane over 70% Soilds
FloorGrit was designed to make the perfect floor texture every time. Used in the top-coat only! Medium is great for any resinous system with a solid content of 70% and higher. Mix 16-32 ounces (starting point) per 1.5 gallons of mixed material (use more if more texture is needed) and roll at 300 to 500 square feet per gallon.(Pail)
FREE Ground Freight on this product.
Price: See TABLE
Free Ground Freight Shipping is available for U.S. Destinations Only
|MediumGrit-2 Gal||FloorGrit-Medium Texture for High Solids Materials||40-60 Grit||2-Gals - 8 lb.||$ 35.00|
|MediumGrit-5 Gal||FloorGrit-Medium Texture for High Solids Materials||40-60 Grit||5-Gal Life Latch Reusable Pail 20 lb.||$ 85.00|
|Medium Grit Bulk||FloorGrit-Medium Texture for High Solids Materials||40-60 Grit||Per Pound 10-50||$3.75|
FloorGrit was designed to make the perfect floor texture every time. Used in the top-coat only! Fine is great for any resinous system with a solid content of less than 70%. Mix 8 - 16 ounces (start
The Greatest Sand for Patching; Sloping and Slurry you will every use. This special blend using 7 grades designed to pack tight. Mix 18 lb into 3 pints of epoxy and see the magic for the perfect Co
Great Non-Skid Aggregate for all Epoxies and Urethane. Always make sure to choose the correct grit size; before your ordering your material. Fine texture uses #54; Medium is #36. Coarse is 24; 20 a
This stainless steel wire cut at 1/32nd can be broadcasted into Epoxy like sand. It will make a very tough wear resistance floor system. It needs to be an addition top-coat to your system. Budget .